In oil extraction, special environments pose extremely stringent tests on the performance of tubing. Different tubing grades need to be matched to deal with such conditions.
In the deep – well environment with high temperature and high pressure, tubing of P110 grade can play a significant role. The yield strength of this type of tubing can reach 930 MPa, and the tensile strength is approximately 1100 MPa. Even under temperatures of several hundred degrees Celsius and pressures of dozens of megapascals, it can still maintain stability and reliably transport oil. For example, in the exploitation of some ultra – deep wells in western China, P110 – grade tubing undertakes the crucial task of oil transportation.
In highly corrosive environments, such as oil wells containing corrosive gases like hydrogen sulfide and carbon dioxide, C90 – grade tubing stands out with its excellent corrosion – resistance. While maintaining a certain strength (yield strength of around 620 MPa), it shows good tolerance to various corrosive media. This effectively extends the service life of the tubing and reduces maintenance costs, and is widely used in many sulfur – containing oil wells in the Middle East.
In low – temperature environments, such as polar regions or deep – sea low – temperature areas, N80Q – grade tubing performs outstandingly. Based on ensuring a yield strength of approximately 552 MPa, special alloying elements are added, which significantly enhances low – temperature toughness. It can effectively resist the risk of low – temperature cracking and ensure the smooth progress of oil extraction. It plays an important role in some offshore oil wells in the Arctic region.
Введение При выборе обсадных труб для нефтяных скважин тип соединения играет столь же важную роль,…
Обсадные трубы и трубопроводы (OCTG) работают в экстремальных условиях скважины: при высоком давлении, высокой температуре,…
三层聚乙烯(3PE/3LPE)外涂层仍然是地下石油、天然气和水管道的主要防腐蚀系统。在评估3PE的质量控制时,采购商、EPC承包商和管道工程师最常提及的三项测试是:涂层缺陷测试、涂层厚度测量和剥离强度测试。许多人认为这些测试是完全必要的。 本指南阐述:涂层缺陷检测、厚度测量和剥离试验是每根涂层管道的主要100%无损生产检测项目。施工许可证还要求进行一系列符合ISO 21809-1和DIN 30670标准的破坏性批次试验,包括阴极剥离试验、冲击强度试验、压痕试验和冷弯试验。对于索纳特拉克(Sonatrach)、索内尔加兹(Sonelgaz)以及其他类似的北非油气公司的招标项目,生产无损检测报告和批次鉴定试验报告均是材料验收的必要条件。 1. 涂层连续性控制(火花法/检测贯穿缺陷) 连续性测试是一种高压无损检测方法,旨在检测三层聚乙烯 (3PE) 涂层中的贯穿孔、涂层变薄、裂纹和其他完整性问题。涂层固化后、发货前,对管道表面进行 100% 的检测。 适用标准:NACE SP0188、ASTM G62、ISO 21809-1(附录…
Недавно делегация ценных клиентов из Нигерии посетила производственный комплекс IMRI для проведения инспекции на месте…
OCTG — сокращённое от «Oil Country Tubular Goods» — представляет собой комплексный термин, обозначающий специализированные…
Ознакомьтесь с пятью основными международными стандартами железнодорожного транспорта по всему миру. Поймите ключевые различия между…